Today, after consulting with my lithography friend Cecilia, I felt confident to begin working on the images for the artist book I’ll be printing at KKV Grafik in Malmö, Sweden. The first step was to prepare the mylar (a flexible plastic film), giving it a texture to hold the mark.
The mylar, cut to the right size for my project, lays on top of a stone. I then add water and carborundum (silicon carbide) and then push a smaller stone over the top, making a figure eight, for approximately 5 minutes.
The grinding makes a gorgeous sound and I felt myself swaying along with the figure eight. It’s a mesmerizing process I really enjoy, which is good because I have many pieces of plastic to prepare for this project. After the grinding is complete, I rinse the plastic, wash away the carborundum, and, because my strip is wider than the stone, start the process over again on the side not yet ground. Fortunately I don’t have to worry about grinding too much.
When the plastic is fully prepared, I rinse and hang to dry. In this image, the prepared plastic is to the left and an unprepared piece is hanging to the right.
Cecilia confirmed the litho plate picks up only dark marks when exposed. The marks I made that did not show up on the experimental plate were too light. Cecilia brought me something that looks like a hockey puck and that, when mixed with water and a brush, creates a dark black mark suitable for this lithographic method, where the artwork is exposed onto a metal plate.
I intended to ride a bicycle to the sea each day, but the timing hasn’t worked out. Finally, today, after a full day in the studio, I hopped on the bike and headed toward the Baltic Sea. I rode on bike paths the entire way, past a large, wooded park I plan to visit tomorrow, through neighborhoods, ending up on a path along the coastline. It took less than 30 minutes.
Many Swedes were swimming. But not me. My swimsuit is in Minnesota.
However, I’ve heard of a sauna here in Malmö where people jump into the Baltic, naked, to cool off from the sauna. Tempting…